Carel plug-in Manuel d'utilisateur télécharger pdf (Page 37)

pCOWeb +030220471 – rel. 1.0 – 02.05.2007 37

NOTE 1 The older versions of the pCO operating systems (BIOS) do not manage the entire range of variables. In this case “U”

is shown in the corresponding locations.

NOTE 2 If all the variables are shown with a “U” there is a problem in communication with the pCO. In this case, check the

pCO-pCOWeb communication settings (see

8.5 on page 39)

NOTE 3 If some variables show a “U” among other valid values, check that the application on the pCO uses the supervision

atoms correctly; the most frequent causes are: variables written too frequently, or two different variables that use the

same supervisor index; see the technical documents on the pCO application development environment.

For further information on exchanging the values of the variables between the pCO and pCOWeb see

APPENDIX C on page 56.

MENU AREA

The “Menu” area is always the same for all the main configuration pages.

It contains:

• A - buttons for opening the main configuration page.

• B - “Reboot” button; when selecting this, pCOWeb will be rebooted without requesting

confirmation. This is required in some phases of the configuration.

• C – System is using (see

3.1.2 on page 12):

- Factory Parameters: pCOWeb is using the Bootswitch parameters (Figure 3.g on

page 12).

- User Parameters: pCOWeb is using the parameters set by the user.

• D – displays the pCOWeb firmware version:

A: Applications B: Bios.

IMPORTANT

: do not confuse this with the firmware version (“BIOS”) of the pCO!

• E – displays the pCOWeb MAC address (see

2.2 on page 9).

• F – displays the pCOWeb date and time at the moment of the last update requested for the

page displayed from the PC (for example with F5).

• G – symbol that the HTML page conforms to the HTML 4.01 standard.

8.2.3 Displaying the main page

When a configuration page is displayed, the main page can be recalled by clicking “Customer Site”; a new window

will be opened with the

main page, index.html where featured, customised via FTP by the user when creating the site in relation to the pCO application program

used; if not, the page displayed will be the default (see

Figure 3.i on page 13).

8.2.4 Useful contacts

Clicking “Info & Contact” displays the following page with useful contacts at CAREL.

Figure 8.c – Click to refresh

the Body section shown in

Figure 8.b

Figure 8.d - Menu area

Figure 8.e - Displaying the

main page

Figure 8.f – Useful contacts at CAREL

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 79 80

Commentaires sur ces manuels

Pas de commentaire

Carel plug-in Manuel d'utilisateur Page 37

Commentaires sur ces manuels

Produits connexes et manuels pour Thermostats Carel plug-in